Atech OEM FL301 Series Clamp On Magnetic Flow Meter, China Low Price 4-20ma Output Electromagnetic Flowmeter
Used in beverage, chemical, pharmaceutical, petroleum, waste water, water, mining, mineral processing, power, pulp and paper. And the chemical industry. Magnetic flow meters are used in water treatment plants to measure treated and untreated sewage, process water, water and chemicals. Mining and mineral processing industry applications include process water and process slurry flows and dense media flows.
Speifications
| |
| Converter | | Compact Type | IP65 | | Remote Type | IP65(IP68 optional) | | Measurement sensor | | Nominal Diameter | DN15-DN1000 | | Pressure rating
(High pressure can be customized) | DN6 - DN80, PN<4.0MPa | | | DN100 - DN150, PN<1.6MPa | | | DN200 – DN1000, PN<1.0MPa | | | DN1200 – DN2000, PN<0.6MPa | | Lining Material | Chloroprene rubber (CR),
Polytetrafluoroethylene (PTFE/F4),
Fluorinated ethylene propylene (FEP/F46),
Teflon(PFA) | | Electrode Material | 316L Stainless Steel, Hastelloy C, Hastelloy B, Ti, Ta, Pt | | IP Rate | IP68 | IP65 | | Medium temperature | -25 – 180℃ | -10 – 80℃ | | Serial communications | RS-485 | | | Output | Current (4-20 mA) , pulse , frequency , state switch | | Max measuring error | Measurement value ±0.5%(Flow speed > 1m/s)；
Measurement value ±0.5% ±2mm/s(Flow speed <1m/s) | | Repetitiveness | 0.15% | | Power supply | 100-240VAC,50/60Hz, 22VDC—26VDC | | Power consumption | Max 15VA | | Signal cable | Apply only to remote type | | Shielded cable | Signal section,wire: 0.5mm2 Cu /AWG20 | |
Main features
1. Backlit LCD display
2. English menu
3. Display instantaneous and accumulative flow value
4. Explosion-proof housing (CT4, CT6 optional)
5. Not influenced by temperature, viscosity, pressure and density
6. Corrosion protection and self-diagnosis
7.Measure both to and reverse flow
8. Super large display, easy to operate
9. Long-term EEPROM, save data when power off
10. Support MODBUS/HART communication protocol
Installation Sketch
If the pipe drop exceeds 5m, install an exhaust valve downstream of the sensor
There must be a straight pipe section with a lengthof at least 10*D (D is the inner diameter of theflowmeter) in front of the flowmeter, and a straight pipe section with a length of 5*D at the rear.
Product Tags:
|
|
OEM FL301 Series Clamp On Electromagnetic Flow Meter 4 - 20mA Output Images
|
